Accessories

Accessories For Torque Testing Devices

Torque Tester Accessories -Incremental Torque Gauge

Incremental Torque Gauge

The Incremental Torque Gauge is specially designed and manufactured to mount on all of our Secure Pak torque tester models. Ensuring package integrity can be achieved by checking closure removal torque and incremental torque periodically during filling line production.

Hand Chucks For Torque Testers

Hand Chuck For Torque Testers

Secure Pak carries a variety of Hand Chuck's, for both incremental testing and for ease in removing your bottle caps. We have standard sizes or if you send in bottle/cap samples, we can custom make them to fit your cap.

Torque Tester Custom Brackets

Torque Tester Custom Brackets

Secure Pak torque testers can accommodate from a 1/2" diameter container up to a gallon size container. If your container is smaller, larger or has an off-set cap, custom brackets can be made. In order to quote for a custom bracket, we would need samples.

Device Chucks TorqTraQ

Interchangeable chucks used with the TorqTraQ® Device to securely and repeatedly engage with your closure or capper during torque measurement. These chucks are made with aluminum and can be installed or swapped in a matter of seconds.

Order Torque Tester Parts & ACcessories today

Do you have questions about our torque testing accessories and parts? Contact Us today! Our team will happily create your custom order or help you select the right products for your torque testing needs. 

Torque Tester Custom Brackets
Torque Tester Custom Brackets
Torque Tester Brackets
Torque Tester Custom Brackets
Incremental torque gauge
Incremental Torque Gauge
Hand Chucks For Torque Testers
Hand Chuck For Torque Testers

Accessories

We offer several accessories for our equipment to improve and maintain their performance

  • Incremental Torque Gauge

Plastic beverage closures must be monitored to maintain good cap application to ensure package integrity. This can be achieved by checking closure removal torque and incremental torque periodically during filling line production. Secure Pak now stocks the Incremental Torque Gauge, which is specially designed and manufactured to mount on all of our Secure Pak torque tester models.

  • Calibration Kits

Once you establish a calibration schedule for your Secure Pak torque testers, or just want to verify calibration of your testers, our calibration kits enable you to conduct calibration testing on site. This will assure optimum consistency from day-to-day or week-to-week, and it will also eliminate cost, risk, and possible downtime. The kit consists of a calibration fixture, wire, leverage arm, and tester-appropriate weights, as well as thorough instructions on its use and the ASTM write-up. Because the fixture must be mounted to a solid surface, it is always convenient and easy to use. We perform calibrations and repairs at our plant in Millbury, Ohio.

  • Brackets

Secure Pak torque testers can accommodate from a 1/2″ diameter container up to a gallon size container (which is approximately 6″ in diameter). If your container is smaller, larger or has an off-set cap, custom brackets can be made. In order to quote for a custom bracket, we would need samples. Please contact Secure Pak for additional information.